PS1030 Small Form Factor Power Supply


Rugged 30 Watt DC/DC Small Form Factor Power Supply for Harsh Environments

The PS1030 is a high efficiency, small form factor power supply. It is intended for embedded systems operating in harsh environments. The PS1030 is designed around a standard ETX board outline with a standard 2 mm connector.

Product Features

  • 24/28VDC nominal input
  • Operates through 6V initial engagement surge
  • On board EMI filter - no additional filter required
  • Single output (5V and 3.3V options available)
  • 30 Watts output
  • 90%+ efficiency
  • Low power standby/sleep mode
  • Inhibit and enable control inputs
  • Built-In Test (BIT) status indicator
  • Reset/power good indicator
  • Output over voltage and over current protection
  • Over temperature warning indicator
  • Thermal shut down protection
  • Nuclear Event Detection (NED) and circumvention

Specifications

PS1030 Small Form Factor Power Supply Specifications                 

View Datasheet

Operating Temperature -46°C to +85°C (cold wall)
Storage Temperature -55°C to +105°C
Vibration MIL-STD-810 Method 514, Procedure I; Category 13, 14 and 20
Shock MIL-STD-810 - Operational: Method 516, Procedure I
Altitude From 1,500 feet (460 meters) below sea level to 60,000 feet (18,300 meters) above sea level; MIL-STD-810, Method 500, Procedure II
Rapid Decompression 8,000 feet (2,440 meters) to 60,000 feet (18,300 meters); MIL-STD-810, Method 500, Procedure III
Humidity 95% RH non condensing; MIL-STD-810, Method 507
Fungus MIL-STD-810, Method 508
EMI/EMC MIL-STD-461 CE102 with on board filter
ESD Supports EN61000-4-2 in intended enclosure
15kV max air discharge
8kV contact discharge